Self-aligning and deviation correction idler

2026-01-05 10:10:54

Developed for the problem of deviation in long-distance conveyors and curves, it is equipped with an automatic deviation correction mechanism, which can flexibly rotate and adjust the Angle, limit the lateral displacement of the conveyor belt, and prevent the edge from rubbing against the frame and being damaged. Produced in accordance with the MT/T 1097-2008 standard, the trough Angle can be selected as 30°/35°, the length is 200-1500mm, and it is compatible with conveyors with a bandwidth of 500-2000mm. The roller body is made of polyurethane material, which features wear resistance and noise reduction, and does not damage the surface of the conveyor belt. The bearings are high-precision self-aligning bearings, with low rotational resistance and smooth operation without abnormal noise. When installing, the same set of roller axes should be kept parallel, with the centerline deviation not exceeding ±2mm. This can effectively ensure the continuous operation of the conveyor line, reduce material spillage and equipment wear, and is suitable for multiple scenarios such as mining and chemical industries.